Here are some examples of how the COM1000 can be deployed
As
a stand-alone device, the COM1000 can:
-
Count Contact Closures
-
Log Analog Values
-
Trigger a RELAY based upon a timer
-
Monitor DIGITAL INPUTS (Contact Closures) and trigger
a RELAY upon change in a contact
-
Monitor ANALOG INPUTS and trigger a RELAY upon ANALOG
VALUE changes (Set Points)
-
Trigger a RELAY upon change in status of DIGITAL
INPUTS (Contact Closures)
-
Trigger a RELAY upon ANALOG VALUE changes (Set Points)
When
connected to a LAN or PPP connection, the COM1000 can:
-
Update DNS hostname tables to reflect change in IP
Address (Dynamic DNS)
-
Send UDP Packets or initiate TCP Sessions upon arrival
of Serial Data Stream
-
Initiate Outbound UDP Packets or TCP Sessions based
upon either of the above
-
Send an email notification on a change in state of a
DIGITAL INPUT
-
Send an email notification on a change in high or low
ANALOG VALUES
-
Send an email upon arrival of Serial Data Stream
(Serial data can be included in message)
-
Change Icon/Send Message using Instant
Messenger
When
connected to a 3G Wireless modem, the COM1000 can:
-
Count Contact Closures and send the values via
Circuit-Switched, SMS, or 3G Data
-
Log Analog Values and send the values via
Circuit-Switched, SMS, or 3G Data
-
Trigger a RELAY based upon receiving an SMS message
from a phone or email
-
Monitor DIGITAL INPUTS (Contact Closures) and send an
SMS alert or email on change
-
Monitor ANALOG INPUTS and send an SMS alert or email
on change in value (Set Points)
When
connected to a TERMINAL (RTU, PLC, or Logger) the COM1000 can also:
-
Store serial data
-
Trigger a RELAY based upon a serial data event or
value
-
Send UDP Packets or initiate TCP Sessions upon arrival
of Serial Data Stream
-
Send an email upon arrival of Serial Data Stream
(Serial data can be included in message)
-
Monitor serial data and initiate email, UDP or TCP
when needed (Report By Exception)
-
Change Icon/Send Message using Instant Messenger upon
serial data event or value
-
Provide an Instant Message access to
the serial device (Instant Message Device ServerTM)
|
